The LOTOS LTP7000 IGBT Plasma Cutter is one of the most powerful inverter plasma cutters in the market. The pilot arc feature is especially useful for continuous cutting on rough surfaces or dirty metal. It has been redesigned to incorporate the latest high frequency inverter technology using V-MOSFETs, along with PWM (Pulse Width Modulation), the combination of which help deliver a far more constant, concentrated and precise current to the cutting surface. With this plasma cutter, the user can achieve smooth, clean and uniform cuts on a wide range of surfaces with minimal heat input and without distortion of metal. It is very easy to use by the DIY user, while fully accommodating the demands of professional operators.
Ø 70-amp pilot arc plasma cutter
Ø Automatic dual frequency (50/60Hz)
Ø High frequency start and contact start hand torch
Ø Suitable for stainless steel, alloy steel, mild steel, copper, brass, and aluminum, etc.
LTP7000 User Manual
208-240V, 1-PH, 50/60Hz
208-240V, 1-PH, 56A
Duty cycle @ 40°C (104°F)
Dimensions with Handle
19” (483mm) L
12” (305mm) H
8” (203mm) W
Clean, dry, oil-free air
Recommended gas inlet flow rate / pressure
4.8cfm @75 psi
Input power cable length
6’ (1.8 m)
Maximum Severance Cut Thickness*
Normal Ideal Use 3/4" (19mm)
Max. Ideal Cut 1.15”(29mm) @70A
1 Year Warranty Included
* Production cutting thickness are the results of LOTOS's laboratory testing. Production speeds are approximately 80% of maximum. For optimum cut quality, cutting speeds may vary based on different cutting applications.