Automatic monobloc in stainless steel made of:
 6 Rinser in stainless steel for bottles with 115mm max diameter (Øp mm 540 - Øb mm 115). A gripper device takes the bottle by the neck and - through a system of sprocket-wheel-rack pushed by a cam - turns it upside down. The nozzle enters in to the bottle neck for 70 mm. The injection occurs only in bottle presence. There is no contact between the bottle neck and the injector parts. The dripping water is recovered in a closed circuit without wetting the machine. The pincers then go back to normal position and opens letting the outlet star place the bottle on the conveyor belt. Electrical height adjustment.
 Bottle deaeration station. A high vacuum pump takes out about 90% of the air inside the bottle. After that the bottle is filled with neutral gas chosen by the customer (Nitrogen or CO2). Electrical height adjustment.
 6 Gravity filler with light depression (Øp mm 360 - Øb mm 115). The filling valves (patented) cut off both the wine and the gas return, excluding any contact between the inside of the tank and the environment. The filling level changes between 30 and 90mm from the top of the mouth. Wine feeding from the bottom allows a natural and total emptying of the tank. The flow is adjusted by a pneumatic electrovalve. The washing and sterilization of the tank provide the outflow from above. The filling valves have got an open position for washing and sterilization. The pedestals of the bottles are mechanical with thrust by spring and return by cam.
 Gas injector before corking reduces the oxygen quantity between wine and cork (the injector has dummy bottle for its own sterilization).
 The 4140P corker closes the cork slowly to a diameter of 16mm by using 4 stainless steel prismatic guide jaws hardened, ground and polished. It creates the vacuum in the bottle neck by a high vacuum pump so that the fast introduction of the cork would not create any pressure and avoid any risks of dripping. The head and centring cone disassembling are very easy.
The bottles inlet and the transfer from rinser to filler are synchronized by infeed screws.Monobloc supplied with safety guards in accordance with CE standards.Equipped for a cylindrical bottle.
Output 750 liters/hourSpeed 300-1200 bottles/hour
Category:RINSING - DEAERATION - FILLING - CORKING - MONOBLOCK