AUTOMATIC CAPPER 4195P/2 CORK+SCREW
Automatic corker in stainless steel with cork + screw on the same column composed of:
 Gas injector before corking reduces the oxygen quantity between wine and cork (the injector has dummy bottle for its own sterilization).
 The 4140P corker closes the cork slowly to a diameter of 16mm by using 4 stainless steel prismatic guide jaws hardened, ground and polished. It creates the vacuum in the bottle neck by a high vacuum pump so that the fast introduction of the cork would not create any pressure and avoid any risks of dripping. The head and centring cone disassembling are very easy.
 Screw capper. The first operation is the gas injection in bottle to reduce the quantity of oxygen between wine and capsule. The second operation is the gas injection in the capsule to reduce the quantity of oxygen in the capsule. The third operation is the placement of the capsule on the bottle neck with the help of a pneumatic piston. The last operation is the capsule closure on the bottle neck with a 4 rollers device (2 for thread and 2 for bottom closure). The device has a no-cap no-roll device. The rotation speed can be adjusted with the inverter.
Infeed screws bottles inlet.Machine to be installed in line.Corker with safety guards in accordance with CE standards.Equipped for a cylindrical bottle.
Cork Speed 600-300 bottles/hour
Screw Speed 600-2500 bottles/hour
NOTE: The corker has no corks hopper. It is advisable using the corks feeder 4140W-800. (See the CAPSULES FEEDER section).
NOTE: the monobloc has only one capping station, hence it can work only with the cork head or with the screw head. Changing the type of capsuling requires the technical time for the column rotation.
Category:SINGLE HEAD AUTOMATIC CORKERS AND SCREW CAPPERS