Fermentation Tank

supplied by:

Price: Click To Get Quote

Product Type:
Jacketed: Yes
Shape: Conical
Dimensions: To be determined by RSL and Customer
Capacity: Nominal capacity plus 25%
Top Head: ASME dished head (gauge varies based on tank diameter) 
Lifting Lugs: (2) lifting lugs – minimum
CIP: Removable CIP & fixed spray ball (180° up, 65mm) on 3” TC with 1 ½” TC line down to working height
Vent Line:	Only on tanks larger than 60HL – 1 ½” or 2” TC vent line from top head to working height
Sidewall: thickness & size varies based on tank size 
Bottom Cone: 60° cone angle, 2” knuckle radius to cone - thickness varies based on tank size
Cooling Jacket:	on sidewall and bottom cone – number of zones determined by tank size. Maximum “20” psi working pressure, 1” to 1 ½” FNPT inlet / outlet, solenoid valves included
Thermowell: (2) ½” FNPT 9” thermowells and RTD’s (Resistance Temperature Detectors)
PRV:	(1) 1 ½” to 2” TC vacuum pressure relief valve on top head or vent line tee.
Legs:		4-5 pipe legs depending on tank size including bracing and adjustable feet
Insulation:	2” insulation on sidewall and bottom cone only - minimum R12 value
Cladding:	All welded 14 gauge cladding on sidewall & bottom cone
Manway:	14” x 18” side oval in/out swing “no lip” manway (Manufactured by: Ripley Stainless Ltd)
Sample Valve: 1” TC RSL Sample valve
Drain: (1) 1 ½” or 2” TC butterfly valve c/w “J” pipe
Racking: (1) 1 ½” or 2” TC butterfly valve
Tank Material: All quality inspected 304 stainless steel alloy
Exterior Finish: 2B with all welds ribbon polished
Interior Finish: 2B with all welds TIG welded with heat stain removed
Tank Pressure:	Maximum “14.9” psi

Options for an Extra Charge:
* Bright exterior spin polish
* RSL 18” Swivel cone manway
* 1 ½” & 2” TC Racking Arm
* Cooling Jacket - maximum”35” psi working pressure
	 	 - maximum”50” psi working pressure
*13” x 17” side oval manway
* Sample valve options
*1 ½” or 2” Butterfly valve on vent & CIP lines
*Copper banding
* Rotating sprayheads
* DN Fittings
* Carbonation stones and ports
* ½” clear hose sight tube – no valve included
* 1 ½” TC Spundling device

All tanks are fabricated using standard material sizes and normal beer tank dimensions

Ripley Stainless Ltd. is a Custom Tank Fabricator and can design and fabricate 
tanks to suit your specific requirements.  Shop drawings must be approved prior to fabrication

Other Conical Fermenter Products